Walk In Environmental Test chamber With Stainless Steel Walls
HD-E705-7 Walk-in Chamber.pdf
Product Files
Walk In Test Chamber is suitable for large parts and machineries undergone low to high and high to low temperature change test, constant hot test, temperature/humid alternating test. User can make to order according to their needs for the room size and test requirements.
Specifications
| Specification | Hd-e705 |
| Temperature Range | -50c To +100c |
| Humidity Range | 40% To 98% Rh |
| Dimension (Internal) (w x d x h) | 1500 x 1500 x 3000 Mm |
| Dimension (External) (w x d x h) | 2850 x 1700 x 3200 Mm |
| Ramp | Variable, Temp. 0~5c / Min & Humidity 0~5%/Min In Average, No Load |
| Accuracy | Temp. ±1c, Humidity ±2.5%Rh |
| Interior Walls | Stainless Steel 304 |
| Exterior Walls | Cold Rolled Stell Plate With Baking Finish |
| Temperature & Humidity Measurement And Controller | 32 Bit Control And Monitoring System. Interface Facility With Rs232 Programmable Temp. Humid. Controller |
| Viewing Window | Multi Pane Glass Window Size |
| Port Holes | 50 Mm Diameter For Wire Routing |
| Power Supply Requirement | Three Phase, Ac380 v ± 10 %, 50 Hz |
| Sound Pressure Level | <72db (a) |
| Condenser Cooling | Water Cooled |
The table parameters is for the company Standard Model parameters, we support customer customization parameters
Temperature measuring and control system
1 the temperature measuring and control system adopts microprocessor system and provided with touch panel for monitoring and digital display:
supplied with support software
software is capable to visualize and graphical anallyse the measured & recorded value.
a. graphical representation and digital display and control of set and actual values
b. digital input and display of temperature in degree centigrade
c. fault diagnosis system
d. 120 stroage of programmes
2 have adjustable safety cut-out against high and low temperature
3 facility to programme temperature measuring using sensor pt100
Standard protection
protective feature to be provided as follows:
a. over load trip & earth leakage trip for complete chamber
b. over load trip for compressors, heaters and motors
c. over temperature cut-off for compressors
d. heater be cut off, if air circulation blowers are off
Our company Introduction:
HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
FAQ
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
Product Tags:
|
|
Three Phase Walk In Environmental Test chamber With Stainless Steel Walls Images
|
